Description
Peavey Classic 20 Mini 20-watt Tube Head
Three 12AX7/ECC83 preamp tubes and two EL84 power tubes provide the 20-Watt Classic 20 MH's power. For a clean and adaptable tone, it includes two channels that adhere to the same gain structure and voicing as the Peavey Classic series amps. A three-band EQ, a sumptuous reverb, and an effects loop are shared by the channels. Foot switches are available for the channels, effects loop, and reverb.
- Switchable wattage for great tube tone at any volume
- Perfect for creating your own unique guitar tones
- Designed for long-term performance
Great tube tone at any level thanks to switchable wattage
The Peavey Classic 20 MH's switchable 20-watt, 5-watt, or 1-watt functionality makes it ideal for practice and recording. You may get cranked-amp tone and distortion at lower volume levels by reducing the wattage. The Classic 20 MH allows you to choose the ideal amount of tube tone and loudness whether you're performing onstage, in your studio, or in your bedroom, ideal for producing your own own guitar tones.
Developed for long-term effectiveness
The Classic 20 MH is often referred to as a gig-ready amp, and by that we mean that Peavey created this guitar amplifier with durability in mind. Any guitarist will tell you that maintaining your tubes properly isn't their favorite task, therefore the Classic 20 MH's Tube Status Indication makes it much simpler to guarantee that your amp is always ready to play. We are aware that there are occasions when a direct output is much superior than mic'ing up your cabinet, and the Mic Simulated Direct Interface on the Classic 20 MH makes it simple to plug straight into the PA with reasonable tone. You can rely on the Peavey Classic 20 MH amp for practice, recording, and performance.
Features of the Peavey Classic 20 MH Tube Guitar Amplifier Head:
- Switchable 20-watt, 5-watt, or 1-watt operation in a small tube amplifier head
- Microphone Simulated Direct Interface USB output
- The Tube Status Indication lets you know if your power tubes are still in good condition
- Channels with foot switches, an effects loop, and reverb
Shipping times may be extended. Certain items might require special ordering or pre-ordering. Please contact us at 1-866-MUSIC-03 before purchasing.
reverb_shipping_profile: |
0 |
reverb_sync: |
force |
reverb_offers: |
on |
Brand: |
Peavey |
Type: |
Amp Head |
Power: |
20 Watts |
Application: |
Guitar |
reverb_model: |
Classic |
reverb_finish: |
Tweed |
Warranty
- Attenuator switch for 20 watts, 5 watts or 1 watt output power
- Two EL84 power tubes and three 12AX7/ECC83 preamp tubes
- Two footswitchable channels with 3-band EQ
- Footswitchable global volume boost, reverb, and effects loop
- Footswitch included
- T.S.I.™ (Tube Status Indication) circuit
- MSDI™ Output with XLR and ground lift switch
- USB Output
- Speaker defeat switch
- Headphone output.
- Footswitch included
- Impedance switch for 16 or 8 ohm cabinets
- Weight Unpacked: 16.75 lb(7.6 kg)
- Weight Packed: 20.50 lb(9.3 kg)
- Width Packed: 13.25"(33.655 cm)
- Height Packed: 19.375"(49.2125 cm)
- Depth Packed: 12.375"(31.4325 cm)
